38
7. System
Basic settings of the system and the Evaluation unit
7.1 Language-controller
Selection:
D / E / F
Selection of the language on the
display of the Evaluation unit
7.2 Sensors
Submenu
7.2.1
Sensor 1
Selection:
ON / OFF
ON:
Sensor is evaluated.
OFF:
Sensor is ignored.
7.2.2 Sensor 2
Selection:
ON / OFF
ON:
Sensor is evaluated.
OFF:
Sensor is ignored
7.2.3 Sensor 3
Selection:
ON / OFF
ON:
Sensor is evaluated.
OFF:
Sensor is ignored
7.2.4 Flow direction
Selection:
Possibility of inversion in case of wrong
forward / reverse
installation
(sensor 1)
.
7.2.5 Flow direction
Selection:
Possibility of inversion in case of wrong
forward / reverse
installation
(sensor 2)
.
7.2.6 Flow direction
Selection:
Possibility of inversion in case of wrong
forward / reverse
installation
(sensor 3)
.
7.2.7 Calibration
Selection:
Function only for multi-sensor systems!
Single / Average
Single:
Each sensor is calibrated via an
individual calibration table. Subsequently,
a measured value calculation is performed based
on the measured values of the individual
sensors. (This function should only be used by
trained ENVEA Process personnel).
Average:
The mean value from all activated
sensors is stored in a common calibration table
in a common calibration table for the calculation
of the measured value.
