envea AirFlow P, Руководство по эксплуатации

Страница: 32 / 47

32
2.6
Calibration sensor 1 Calibration sub-menu for sensor 1
2.6.1 Calibration factor Input: 0.01 … 9.99 Factor for the subsequent adjustment of the
actual measurement of sensor 1.
2.6.2 P1 value
Input:
measurement Output measurement in the selected
mass/time unit.
2.6.3 P1 calibration Transfer: raw value Transfer of the current raw value (filtered)
from the mass flow with the key [
←
].
The value can also be entered directly.
. . . (depending on the number of support points) For additional support points (depending on
[ 2.3 ]), additional value pairs can be set.
2.7
Calibration sensor 2 Calibration sub-menu for sensor 2
2.7.1 Calibration factor
Input:
0.01 … 9.99 Factor for the subsequent adjustment of the
actual measurement of sensor 2.
2.7.2 P1 value
Input: measurement Output measurement in the selected
mass/time unit.
2.7.3 P1 calibration
Transfer:
raw value Transfer of the current raw value (filtered)
from the mass flow with the key [
←
].
The value can also be entered directly.
. . . (depending on the number of support points) For additional support points (depending on
[ 2.3 ]), additional value pairs can be set.
2.8 Calibration sensor 3 Calibration sub-menu for sensor 3
2.8.1 Calibration factor Input: 0.01 … 9.99 Factor for the subsequent adjustment of the
actual measurement of sensor 3.
2.8.2 P1 value
Input:
measurement Output measurement in the selected
mass/time unit.
2.8.3 P1 calibration Transfer: raw value Transfer of the current raw value (filtered)
from the mass flow with the key [
←
].
The value can also be entered directly.
. . . (depending on the number of support points) For additional support points (depending on
[ 2.3 ]), additional value pairs can be set.