User Manual
Pixel Port
For the latest version visit:
www.enttec.com
21 September 2017
ID: 3617472
P a g e
|
3
Software Features
•
Supports the following DMX over Ethernet
protocols:
o
Art-Net 1/2/3
o
Streaming ACN (sACN)
o
ESP
•
Configurable Static or Dynamic (DHCP) IP
(DHCP by default).
•
Up to 2 ethernet universes support.
•
Controls up to 340 RGB or 256 RGBW pixel
LEDs (model dependent).
•
Configurable Pixel Grouping - RGB (1 to 340)
RGBW (1 to 256).
•
Configurable Pixel ordering.
•
Monitors and maintains device temperature
•
Web configurable
•
Easily extendable network – daisy chain
•
Executes live effects on the fly
•
Standalone mode: record and activate using
a list of presets
•
User friendly settings enable quick plug and
play setup
LED Status
The Pixel Port driver comes with four LED indicators
located in the front panel:
Power
•
This LED is red in colour
•
Indicates whether the internal power supply is
working and the unit is ready to operate.
•
If the LED is off after the mains cable is
connected to a working wall outlet, it means
that there is a problem in the unit. In such case
please contact ENTTEC support.
Status
•
This LED indicates the Pixel Port status and
should be constantly flashing.
•
The current operating status of the LED is
indicated as follows:
Link 1 and Link 2
•
These two LED indicate network status for each
etherCON port
LED Colour
Unit Status
Red (static)
Device in boot
White (static)
Idle
Purple (static)
IP Conflict
Yellow over white
Effect mode data receiving
Green over white
Direct mode data receiving
Black over white
Preset mode
1.
Power
2.
Status
3.
Link 1
4.
Link 2
Содержание PIXEL PORT
Страница 1: ...PIXEL PORT ETHERNET PIXEL DRIVER...
