8. Select the
Install from ISO library or DVD drive
button and then select the
appropriate media from the drop down menu.
9. Select
Next
.
10. Select
Home Server
.
11. Select the
Place the VM on this server
button and then select a home server from
the drop down list of available servers.
12. Select
Next
.
13. Select
CPU & Memory
and enter the amount of CPUs, chose your topology and enter
an amount for memory.
14. Select
Next
.
15. Select
Storage
.
16. Select the
Use these virtual disks:
button and select a virtual disk from the display.
17. Select
Next
.
18. Select
Networking
and select the virtual network interface.
19. Select
Finish
.
If the guest VM is configured to have a PCI module via passthrough and
the module is not connected to the VM instance, the guest VM instance
will fail to power on. Verify that the Solo XC card is located on the same
slot that was selected for the passthrough to the guest VM.
C.5. Hyper-V environment
The instructions assume there is a single nShield Solo XC module in the
system.
The commands starting with
PS C:\>
should be run in PowerShell in
elevated mode.
C.5.1. Set up
C.5.1.1. Install Hyper-V on the server
Follow the instructions in the Windows documentation for Hyper-V, see
https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/
.
nShield® Solo and nShield® Solo XC Installation Guide
44 of 49
