Entrematic LCU40H, Руководство по установке, Страница: 30 / 46

30
IP2246EN
11.6 Second level menu - SF (Special Functions)
Display Description
CU - Visualisation of the firmware version on the control panel
→ → →
Release 1.1 [esempio]
SV - Saving user configuration on control panel storage module and/or
on microSD card
[esempio]
→
2”
→ → → →
By selecting → → you can save up to 2 personalised config-
urations in memory positions and only with the storage module
present on the control panel.
With a microSD on the control panel, up to 2 personalised configurations
can be saved in positions
and .
WARNING: if → → is selected, no user configuration can be
saved on and .
WARNING: if the display shows flashing, the storage module or mi-
croSD card may not be present.
Selections
available
RC - Configuration loading
[esempio]
→
2”
→ → → →
The user configurations saved previously can be loaded - and on the
storage module of the control panel, or and on the microSD card.
Display Description
Selections
available
ER - Deletion of a single remote control
→ →
2”
EA - Total memory deletion
→ →
2” 2”
→
RE - Setting memory opening from remote control
OF - Disabled
ON - Enabled When enabled (ON), the remote programming is activated.
To store new remote controls without using the control panel, refer to the remote
control instructions.
NB: make sure you do not accidentally memorise unwanted remote controls.
EP -Setting the coded area messages
If the possibility to receive coded messages is enabled, the control
panel will be compatible with remote controls of the “ENCRYPTED”
type.
Release 1.1 (example)
(example)
(example)
RO
SF - Sp
e
c
ial f
u
nc
tion
s