85
IP2179EN - 2015-11-24
TOP903H
20. Commands and indications
20.1 Deleting the memorised stroke values
20.2 Restoring the factory settings
5
Button for door closure / decreased value
6
Menu button / confirm (stroke
memorisation)
7
Button for door opening / increased value
8
Display
Status messages
A
door fully OPEN
B
door between the two end stop positions
C
door fully CLOSED
While the door is OPENING, the display visualises:
C
B
A
.
While the door is CLOSING, the display visualises:
A
B
C
.
If you press the
[6] and [7] keys simultaneously for a few seconds, the display flashes
, the stroke values are deleted, and the display visualises L4.
NB: the remote controls are not deleted.
Remove the plug from the
connector, then press the
[6] and [7] keys simultaneously for
12s.
The display flashes
, first slowly and then more quickly.
All the adjustments previously made are deleted, and the factory values are restored.
The stroke values are deleted.
Reconnect the plug to the
connector.
The display visualises L4.
NB: the remote controls are not deleted.
The procedures and adjustments can only
be carried out when the display is in mode
A, B or C.
A
B
C
5
6
7
res.
8