14
STORAGE AND HANDLING
- It is recommended control solution is stored at 46~86°F (8~30°C) before
testing.
- Check the expiration date before performing a glucose control solution
test.
- Do not use if expired. Once opened, the control solution expires after 3
months.
Precaution
If your control solution test falls out of range, follow the next steps.
• Try another control solution test. If this test falls out of range, try another
control solution test with a new unopened bottle of test strips.
• Check the expiration dates on all the products you are using. Be sure
you are using only BLE Smart control solution.
• After following the appropriate steps and the control solution test still
falls out of range, do not perform a glucose test. Contact customer
support, USA & Canada: +1-877-458-2646. International: +1-619-684-
6232 or email [email protected].
PERFORMING A BLOOD GLUCOSE TEST
Performing a blood test with your fingertip
1. With the meter OFF, firmly insert the test
strip into the test strip port on the meter
with the arrow pointed toward the meter
and visible from the front of the meter.
NOTE: Do not insert the test strip upside
down or backwards.
2. When you insert the test strip into the
meter port, the meter will automatically
turn ON and the test strip code will be
displayed.
3. Verify the code displayed on the meter
matches the code on the test strip vial. The
BLE Smart meter automatically recognizes
the test strip code.
