Enthermics Comfort EC250, Руководство оператора

Страница: 48 / 60

T
ROUBLESHOOTING
Blanket Warmer
▪
Operator’s Manual
▪
M N-39924
▪
Rev 3
▪
3/20
48
*
All non-critical codes can be cleared using the standby button. Critical errors (marked with a *) can
only be cleared by setting the power switch at the rear of the warmer to the OFF position and
allowing the warmer to cool.
*EFAn Fan or Fan Sensor
Failure
◾ Check to make sure the fan sensor wires did not disconnect from the fan
or the control board.
◾ If the error persists after checking the wires, replace the fan.
Red iv fluid
temperature
status
indicator
Red LED is
illuminated within
iv storage shelf
◾ Set the power switch to the OFF position.
◾ Remove any iv bags from inside the warmer.
◾ Set the power switch to the ON position.
◾ Visually check to see if red LED remains illuminated.
◾ Contact service if error persists.
Code Refers to Action required