3-7
8.
Click the DNS tab to see the primary and secondary DNS servers. Record the servers
here:
_____________________________________________________________
_____________________________________________________________
9.
After writing down your IP settings, click the IP address tab. Select Obtain IP
address automatically and click OK. Click OK again to close the Network window.
10.
Windows may copy some files. When the copying is complete, you are prompted to
restart your system. Click Yes and your computer will shut down and restart.
11.
Go to the
Obtaining IP Settings
.
Windows 2000
Perform the following steps to determine how your IP address assignment is determined
and configure the TCP/IP settings on Windows 2000:
1.
From the Windows desktop, click the Start button. Choose Settings, then click
Control Panel.
2.
Double-click the Network & Dial-Up Connections icon.
3.
Double-click the icon that corresponds with the connection to your RoamAbout R1.
4.
Click Properties.
5.
Double-click Internet Protocol (TCP/IP).
6.
All then information you need to record is in the Internet Protocol (TCP/IP)
Properties dialog box. Record the information here:
_____________________________________________________________
_____________________________________________________________
_____________________________________________________________
_____________________________________________________________
If Obtain an IP address automatically and Obtain DNS server address
automatically are already selected, your computer is already configured for DHCP.
Click Cancel to close each window, and go to the
Disabling HTTP Proxy
section
of this document.
7.
Select Obtain an IP address automatically and then select Obtain DNS server
address automatically. Then click OK.
8.
Click OK, or Close, to close each window.
9.
Go to the
Obtaining IP Settings
section in this chapter.
