Enterasys NetSight Element Manager Скачать руководство пользователя | Manualshive

Страница: 11 / 108

background image

1-1

Chapter 1

Introduction

How to use this guide; related guides; software conventions; getting help; MicroMMAC-T firmware
versions

Welcome to the NetSight Element Manager for the MicroMMAC-T User’s Guide.
We have designed this guide to serve as a simple reference for using NetSight
Element Manager for the MicroMMAC-22T/24T and MicroMMAC-42T/44T.

The MicroMMAC-22T/24T

™

and MicroMMAC-42T/44T

™

are intelligent Token

Ring hubs that provide front panel ports for network connections, a rear-panel
HubSTACK

™

Interconnect Bus port for stackable connections, and a rear-panel

port for one optional Bridge Router Interface Module

™

(BRIM

®

) that provides the

MicroMMAC-T

™

with bridging and routing capability. All the devices fully

conform to the IEEE 802.5 standards, and provide the flexibility to connect
networks using a variety of media via 12 or 24 active RJ45 ports for STP or UTP
lobe connections. All of the models are functionally identical; the only difference
among them is the configuration of the front panel ports: the MicroMMAC-22T
has 12 built-in active UTP RJ45 lobe ports; the MicroMMAC-24T has 24 built-in
active UTP RJ45 lobe ports; the MicroMMAC-42T has 12 built-in active STP RJ45
lobe ports; and the MicroMMAC-44T has 24 built-in active STP RJ45 lobe ports.
Using the MicroMMAC-T’s external HubSTACK-IN and HubSTACK-OUT
connections on the rear of the unit, you can stack as many as four of Cabletron’s
STH Series non-intelligent Token Ring hubs with one MicroMMAC-T, and the
entire stack can be managed by the MicroMMAC-T as a single Token Ring. This
configuration allows you to expand the connectivity of the MicroMMAC-T to up
to 120 ports.

NOTE

Since the devices covered in this User’s Guide are functionally identical, they will be
jointly referred to throughout the text as the MicroMMAC-T. Likewise, since the only
differences in the windows for each device will be the device name (MicroMMAC-24T,
MicroMMAC-44T, etc.) and the number of ports displayed, only the MicroMMAC-24T
windows will be shown.

«
...
9
10
11
12
13
...
»

Содержание NetSight Element Manager













































































































Отзывы:

Нет отзывов

Похожие инструкции для NetSight Element Manager

imagePROGRAF W6400

Бренд: Canon Страницы: 84

Бренд: Ulead Страницы: 60

Бренд: Avaya Страницы: 48

GPS Information

Бренд: Globalsat Страницы: 7

ANTI-VIRUS FOR MICROSOFT EXCHANGE 9.00

Бренд: F-SECURE Страницы: 174

Бренд: FieldServer Страницы: 32

256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010

Бренд: Autodesk Страницы: 1638

Бренд: DigiDesign Страницы: 886

Бренд: LaCie Страницы: 6

ANTI-VIRUS 5.5 - FOR CHECK POINT FIREWALL-1

Бренд: KAPERSKY Страницы: 141

Бренд: Oki Страницы: 34

ML 2851ND - B/W Laser Printer

Бренд: Samsung Страницы: 30

EOS DIGITAL REBEL XT/350D DIGITAL

Бренд: Canon Страницы: 42

Бренд: Harman Kardon Страницы: 19

ThinkCentre M50

Бренд: Lenovo Страницы: 440

Бренд: TC Electronic Страницы: 6

Pyramix 6.2 SP2

Бренд: Merging Technologies Страницы: 16

Smart Web Client

Бренд: Amanda Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды