Enterasys NetSight Element Manager Скачать руководство пользователя страница 86 | Manualshive

Страница: 86 / 108

background image

Token Ring Alarms

4-4

Ring-Level Alarm Limits

The following thresholds, listed in the section of the window labeled Station
Errors

, are based on the number of occurrences of the selected event detected by

the station within a user-defined time interval.

Line

The threshold of line errors detected by the selected
station port. These indicate a non-data bit between the
starting and ending delimiters of data, or an FCS error.
The default value is 2.

Internal

The threshold of recoverable internal errors detected by
the selected port, indicating that the Network Interface
Card of its attached station may be in marginal operating
condition. The default value is 1.

Burst

The threshold of burst errors detected by the selected
station port. These signify a bit information-encoding
error (no transitions between 0 and 1 over five half-bit
times). The default value is 10.

A.C.

The threshold of frames detected by the selected station
port that contain errors in the A or C bits. The default
value is 2.

Rx Congestion

The threshold at which the port cannot copy a frame
addressed to it because of a lack of internal buffering.
The default value is 124.

Setting Ring-Level Alarm Limits

To set an alarm:

1.

If you wish to alter the default threshold values, place the text cursor into the
desired alarm event field, and type in the threshold value.

2.

To enable an alarm, click on the checkbox next to the desired alarm event
field. An X in the checkbox indicates that the alarm is enabled.

3.

Click on the clock icon next to the Within: field. A New Alarm Timebase text
box will appear. In this text box, you enter the time interval for the specified
number of events to occur before the alarm is activated.

NOTE

When the Alarm Limits window is invoked, the Station Errors fields do not present any
values. This is because it is possible that station-level alarm limits have been set at
individual stations (via the Station Alarm Limits window) that may differ from those set
at other individual stations or at the ring level. Refer to the Station Alarm Limits
windows for individual stations to view their current station-level alarm limits.

«
...
84
85
86
87
88
...
»

Содержание NetSight Element Manager













































































































Отзывы:

Нет отзывов

Похожие инструкции для NetSight Element Manager

PowerShot SD10 Digital ELPH

Бренд: Canon Страницы: 124

RS232 interface for GT47 embedded apps UART

Бренд: Sony Ericsson Страницы: 14

Бренд: McAfee Страницы: 2

Бренд: Qlogic Страницы: 180

Бренд: Casio Страницы: 18

AMD-8151 HyperTransport AGP3.0

Бренд: AMD Страницы: 16

ENTERPRISE SOLUTION ERASING FI

Бренд: Blackberry Страницы: 10

Call Detail Reporting

Бренд: Altigen Страницы: 97

Altiware OE 4.5

Бренд: Altigen Страницы: 455

Бренд: Vitek Страницы: 1

Бренд: AVG Страницы: 234

Бренд: GameShark Страницы: 16

Бренд: TomTom Страницы: 58

Бренд: MACROMEDIA Страницы: 678

ANTI-EXECUTABLE STANDARD

Бренд: FARONICS Страницы: 46

Бренд: JDS Uniphase Страницы: 2

Security Protect Manager

Бренд: Asus Страницы: 14

Бренд: Hasselblad Страницы: 116

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды