Enterasys Enterasys Matrix DFE-Gold Series, Руководство по настройке

Страница: 360 / 944

Configuring Spanning Tree Port Parameters show spantree adminedge
6-60 Spanning Tree Configuration
Example
This example shows how to reset the admin path cost to 0 for fe.3.2 on SID 1:
Matrix(rw)->clear spantree adminpathcost fe.3.2 sid 1
show spantree adminedge
Use this command to display the edge port administrative status for a port.
Syntax
show spantree adminedge [ port port-string ]
Parameters
Defaults
If port ‐ string is not specified edge port administrative status will be displayed for all Spanning Tree
ports.
Mode
Switch command, Read ‐ Only.
Example
This example shows how to display the edge port status for fe.3.2:
Matrix(rw)->show spantree adminedge port fe.3.2
Port fe.3.2 has a Port Admin Edge of Edge-Port
set spantree adminedge
Use this command to set the edge port administrative status on a Spanning Tree port.
Syntax
set spantree adminedge port-string { true | false }
Parameters
Defaults
None.
port ‐ string (Optional) Displays edge port administrative status for specific port(s).
For a detailed description of possible port ‐ string values, refer to “ Port
String Syntax Used in the CLI ” on page 4 ‐ 2.
port ‐ string Specifies the edge port. For a detailed description of possible port ‐ string
values, refer to “ Port String Syntax Used in the CLI ” on page 4 ‐ 2.
true | false Enables ( true ) or disables ( false ) the specified port as a Spanning Tree
edge port.