Enterasys Enterasys Matrix DFE-Gold Series, Руководство по настройке

Страница: 193 / 944

set console flowcontrol Setting Console Port Properties
Enterasys Matrix DFE-Gold Series Configuration Guide 4-7
Defaults
If port ‐ string is not specified, the flow control setting for all console ports will be displayed.
Mode
Switch command, Read ‐ Only.
Example
This example shows how to display the flow control setting for console port com.1.1:
Matrix(rw)->show console flowcontrol com.1.1
Port Flow
------------ --------
com.1.1 ctsrts
set console flowcontrol
Use this command to set the type of flow control for one or more console ports.
Syntax
set console flowcontrol { none | ctsrts | dsrdtr } [ port-string ]
Parameters
Defaults
If port ‐ string is not specified, flow control will be set for all console ports.
Mode
Switch command, Read ‐ Write.
Example
This example shows how to enable DSR/DTR flow control for console port com.1.1:
Matrix(rw)->set console flowcontrol dsrdtr com.1.1
clear console flowcontrol
Use this command to clear the type of flow control for one or more console ports.
Syntax
clear console flowcontrol [ port-string ]
none Disables all hardware flow control.
ctsrts Enables CTS/RTS (Clear to Send/Request to Send) hardware flow
control.
dsrdtr Enables DSR/DTR (Data Set Ready/Data Terminal Ready) hardware
flow control.
port ‐ string (Optional) Sets flow control for specific console port(s).