Enterasys Enterasys Matrix DFE-Gold Series, Руководство по настройке

Страница: 226 / 944

Configuring Link Traps and Link Flap Detection set port trap
4-40 Port Configuration
Mode
Switch command, Read ‐ Write.
Example
This example shows how to display link trap status for fe.3.1 through 4:
Matrix(rw)->show port trap fe.3.1-4
Link traps enabled on port fe.3.1.
Link traps enabled on port fe.3.2.
Link traps enabled on port fe.3.3.
Link traps enabled on port fe.3.4.
set port trap
Use this command to enable or disable ports for sending SNMP trap messages when their link
status changes.
Syntax
set port trap port-string { enable | disable }
Parameters
Defaults
None.
Mode
Switch command, Read ‐ Write.
Example
This example shows how to disable link traps for Fast Ethernet port 3 in module3:
Matrix(rw)->set port trap fe.3.3 disable
show linkflap
Use this command to display link flap detection state and configuration information.
Syntax
show linkflap { globalstate | portstate | parameters | metrics | portsupported |
actsupported | maximum | downports | action | operstatus | threshold | interval ]
| downtime | currentcount | totalcount | timelapsed | violations [ port-string ]}
port ‐ string Specifies the port(s) for which to enable or disable link trap messages.
For a detailed description of possible port ‐ string values, refer to “ Port
String Syntax Used in the CLI ” on page 4 ‐ 2.
enable | disable Enables or disables link traps.