Enterasys 6E128-26, Руководство пользователя, Страница: 131 / 180

Port Redirect Function Screen
6E128-26, 6E138-25, 6E129-26 and 6E139-25 User’s Guide 5-85
5.24 PORT REDIRECT FUNCTION SCREEN
The Port Redirect Function screen, Figure 5-30 , allows the user to set
each one of the ports on the 6E12X-26 and 6E13X-25 as a source or
destination port. A port can be set to have one or more destination ports.
For example, port 1 can be set as a source port with three destinations,
ports 2, 3, and 4. Traffic from port 1 is then automatically redirected to
ports 2, 3, and 4. Port 1 can also serve as a destination port for other ports.
The port redirect function is extremely useful for troubleshooting
purposes, as it allows traffic to be sent to a particular port(s) where, with
the use of an analyzer or RMON probe, all current traffic from the source
port(s) can be examined.
To access the Port Redirect Function screen from the Module Specific
Configuration Menu screen, use the arrow keys to highlight the PORT
REDIRECT FUNCTION menu item and press ENTER. The Port
Redirect Function
screen displays.
NOTE
The Port Redirect Function screen may not be available
depending on the operational mode that has been set for the
module. Refer to your Release Notes to see which operational
modes support the Port Redirect Function screen. Refer to
Section 5.15.9 , Setting the Operational Mode , for instructions
on configuring the operational mode of the module.
NOTE
Although all traffic from the source port (including, if desired,
errored frames) is sent to the destination port, normal switching
is still performed for all frames on the source port.