Connecting the 5G106-06 to the Network
Installation
3-17
2.
Insert one end of the SC connector, key side down, from the GPIM-01, GPIM-08, or GPIM-09
into the module. See
Figure 3-14
. Ensure that the appropriate cable is used for the application of
the GPIM. Refer to
Appendix C
for the appropriate GPIM and for the fiber optic cable to be used
in the installation.
Figure 3-14
Fiber GPIM Connections
NOTE:
To prevent contamination, leave the protective covers in place when the
connectors or ports are not in use.
Do not touch the ends of the fiber optic strands, and do not let the ends come in contact
with dust, dirt, or other contaminants. Contamination of the ends causes problems in
data transmission.
If the ends become contaminated, blow the surfaces clean with a canned duster. A fiber
port cleaning swab saturated with optical-grade isopropyl alcohol may also be used to
clean the ends.
SC Connector
GPIM-01, GPIM-08, or GPIM-09
3587_05
Key Latch (bottom of SC Connector)
(bottom view)
keys
SC Connector
1
2
