Entec Solar E-1000 Скачать руководство пользователя страница 30

Страница: 30 / 47

“Innovative products for the solar energy industry”

www.entecsolar.es

5.5 Settings

An image of the settings menu can be seen in

Figure 5.8.

From this menu all the necessary device

configurations can be performed. There are three

types of functions or settings that can be found in

the settings menu: operating options, parameter

settings, and additional functions.

The operation options are activated or deactivated

directly in the main screen of the settings menu

via the operation options button. A blue button

indicates a disabled function, while a red one

indicates that the function is enabled. The operating

options are: Show STC curve, APK Connect, Auto

measurement, Auto save, Continuous measurement

and Barcode. Of these options, the only one that

requires additional configuration is Continuous

measurement.

The parameter configuration options are those that

modify certain parameters of the device, either in

general such as date and time, or those that modify

the actual measurement process. Their activation

opens a second screen where the selected setting

can be configured. These options include: Module

settings, Generator settings, Sensor settings, Others

(where the options such as Set date and time, and

Set language can be found).

Additional functions are those that perform

an additional function on top of the I-V curve

measurement. An example of such function is

report generation or firmware update.

These functions are described in detail in the

following sections.

5.5.1 Visualizing the STC curve

This feature permits the display of the curve

extrapolated to STC on the screen. To turn this

feature on or off, go to Settings -> Show STC curve.

This feature is active by default upon turning on

the device. To deactivate it, the button must be

activated each time the machine is turned on. This

option only turns off the display. The extrapolated

curve is still calculated and saved.

5.5.2 APK Connect

The E-1000 has a mobile or a tablet app that

permits remote control. This allows the device

to be transported in a backpack or a case and for

the operator to have his/her hands free for the

connection and disconnection of the circuit under

test

(Figure 5.9.).

The connection between the

E-1000 and the App is made via a WiFi-Direct

connection. Thus, the mobile phone or tablet needs

to have a WiFi connection capability, although this

connection does not need to have Internet access.

Figure 5.8. Image of the settings menu.

Содержание E-1000
















































Результаты поиска

Содержание E-1000

Отзывы:

Entec Solar E-1000, Руководство пользователя, Страница: 30 / 47

Результаты поиска

Содержание E-1000

Отзывы: