ENSONIQ EPS-16 PLUS, Руководство музыканта

Страница: 91 / 260

EPS-16 PLUS Musician's Manual
Section 4 — Effects
Detune Rate
Range: 00 to 99
This parameter controls the LFO rate of detuning incorporated within the reverb.
Detuning creates a slight pitch shift into the reverberated signal, giving it a more
natural sounding decay by breaking up resonant nodes.
Detune Amt — Detune Amount
Range: 00 to 99
This parameter controls the depth of the detuning, that is, how much the pitch will
change. Low values yield a metallic sound. Some voices may require very low
values.
Pre-Delay (HALL Reverb only)
Range: 00 to 500
This parameter creates a delay in the amount of time it takes before the original
signal is fed into the effects processor (reverb). Adjustable from 00 to 500
milliseconds.
DUAL DELAYS; 44KHZ DELAYS
A professional quality stereo digital delay. DUAL DELAYS uses the standard
30kHz (20 voice) rate, while 44KHZ DELAYS utilizes the 44kHz playback rate
(polyphony is reduced to 13 voices) Both algorithms have identical parameters.
BUS1 and BUS2 can have different Mix, Feedback, and Delay Time settings.
BUS3 is dry.
Bus1 (and 2) Delay Mix
Range: 00 to 99
This parameter controls the mix between the original signal and the delay. Setting
this parameter to 00 will allow only the unprocessed signal to be heard, while a
setting of 99 will eliminate it completely, with only the delay portion remaining.
Bus1 (and 2) Feedback
Range: 00 to 99
Determines the amount of signal that will be fed from the output of the right delay
back into the input, increasing the number of repeats in the delay.
Bus1 (and 2) Delay Time Left and Right
Bus1 Range: 0 to 2000
Bus2 Range: 0 to 150
Determines the amount of the amount of time between delays. Each value
increases the delay time by 1 millisecond. The Left and Right channels are
independently adjustable.
Effect Parameters
4 - 9