ENSONIQ EPS-16 PLUS, Руководство музыканта

Страница: 236 / 260

Section 11 — Storage Functions EPS-16 PLUS Musician's Manual
The display shows the current name of the effect, with a cursor (underline)
beneath the first character. If you want to give the effect a new name, do so at
this time. Use the Data Entry Slider or the Up/Down Arrow buttons to
change the underlined character, then press the Left/Right Arrow buttons to
move the underline. Repeat until the display shows the name you want If you
are saving a ROM effect, the name will not be able to be edited. (If you don't
need to rename the effect, just skip this step.)
• Press Enter•Yes. The display will read SAVING <FILE NAME> while the
effect is being saved.
• If there is already an effect file with the same name on the disk, the display will
ask DELETE OLD VERSION? Press Enter•Yes to save the effect, replacing
the one on the disk. Or press Cancel•No to abort the procedure.
• If there is not enough free space on the disk, the display will say NO ROOM
ON DISK. Save the effect to another disk (or delete some files from the disk).
A Note About Saving and Loading from FLASHBANK and Hard Drives
The preceding discussion has dealt with saving and loading EPS-16 PLUS files
using the built-in 3.5 inch floppy disk drive. You can also use the optional FB-1
or FB-2 FLASHBANK memory to save sounds, or a hard drive (through the
optional SP-2 SCSI kit) to save sounds, banks, and sequence memory. Much of
the saving and loading procedure is similar to using the floppy disk drive.
However, if you are using these items, please refer to the manual that came with
the accessory for complete details.
11 - 14
Disk Storage