ENSONIQ EPS-16 PLUS Скачать руководство пользователя страница 190

Страница: 190 / 260

Section 8 — Sequencer Basics

EPS-16 PLUS Musician's Manual

Recording a Sequence

Here we will describe recording a new sequence from scratch. First we will

concentrate on sequencing with the EPS-16 PLUS alone, and then cover
recording MIDI instruments.

1) Create a New Sequence:

• Following the steps outlined earlier in this section, create a new sequence.

2) Record the First Track:

• Select any loaded instrument by pressing its Instrument•Track button. This

makes it the current track.

• While holding down Record, press Play. The EPS-16 PLUS immediately

puts you on the EDIT/Seq•Song page (described earlier) and the click track

starts playing (assuming CLICK=ON or REC on the EDIT/Seq•Song page),
giving the tempo. The first beat of each measure is emphasized.

• Adjust the tempo. Press the Right Arrow button twice to scroll to the

TEMPO parameter. Adjust it to the tempo you want with the Data Entry
Slider.

• Play the MIDI keyboard connected to the EPS-16 PLUS to commence

recording. The bar in which you start playing becomes bar 1 of the sequence.

• Press Stop to end recording. The display will say XXX BARS - KEEP

TRACK? The length (in bars) of the first track determines the length of the

sequence.

• Press Enter•Yes to keep the track, defining the length of the sequence, or
• Press Cancel•No to erase the first track and start over again.

3) Record Additional Tracks:

• Select a different track. Again, selecting any loaded instrument by pressing its

Instrument•Track button makes it the current track. Or you can leave the

• original Instrument•Track selected and overdub (re-record) that track.

• While holding down Record, press Play. After a one bar countoff (if

COUNTOFF=CLICK on the EDIT/Seq•Song page) the EPS-16 PLUS goes
into record and will record what you play on the selected track.

• Press Stop. The display shows:

This is called the PLAY/KEEP page. When NEW is underlined, pressing

Play will play the new track, and pressing Enter will keep it, erasing the

original. When OLD is underlined, pressing Play will play the ORIGINAL
track, and pressing Enter will keep it.

While playing the sequence, press the Left/Right Arrow buttons to move
the cursor between OLD and NEW to hear the original track or the new track.

• With NEW underlined, press Enter•Yes to KEEP the new track, or press

Cancel•No to keep the original. Note that on this page, pressing
Cancel•No will always keep the original track.

8 - 14

Recording a Sequence

Содержание EPS-16 PLUS





































































































































































































































































Результаты поиска

Содержание EPS-16 PLUS

Отзывы:

Похожие инструкции для EPS-16 PLUS

Бренды по названию

Популярные бренды

ENSONIQ EPS-16 PLUS, Руководство музыканта

Результаты поиска

Содержание EPS-16 PLUS

Отзывы:

Похожие инструкции для EPS-16 PLUS

Бренды по названию

Популярные бренды