ENSONIQ EPS-16 PLUS, Руководство музыканта, Страница: 215 / 260

EPS-16 PLUS Musician's Manual
Section 10 — Sequencer Applications
Section 10 — Sequencer Applications
This section covers a number of advanced sequencer applications, including using the EPS-16
PLUS with a variety of external MIDI devices.
Song Position Pointers 10-1
MIDI Song Selects 1 0 - 1
Using the EPS-16 PLUS with a Drum Machine:
To Sync a Drum Machine to the EPS-16 PLUS 1 0 - 2
To Sync the EPS-16 PLUS to a Drum Machine 1 0 - 2
To Sequence a Drum Machine from the EPS-16 PLUS . . 10-2
Using The EPS-16 PLUS with a MIDI Guitar Controller . . 1 0 - 3
Patch Selects and Presets 10-5
Recording into the EPS-16 PLUS Sequencer from a
MIDI Controller
Recording Into a Single Track (One MIDI Channel) . . . 1 0 - 6
Recording Into Several Tracks (Multiple MIDI Channels) . 10-6
Using the EPS-16 PLUS with an External Sequencer
Poly Mode — The EPS-16 PLUS as One Instrument . . 10-7
MULTI Mode — The EPS-16 PLUS as Eight
Independent Instruments 10-8
Some Important Points about MULTI Mode 10-8
Song Position Pointers
The EPS-16 PLUS sends and receives Song Position Pointers via MIDI. Song
Position Pointers are MIDI commands that tell a sequencer or drum machine
where to locate within a song or sequence.
When the EPS-16 PLUS receives a Song Position Pointer, it will locate to the
appropriate place in the selected song or sequence.
The EPS-16 PLUS sends a Song Position Pointer over MIDI whenever you use
the Auto-Locate control (the GOTO function on the EDIT/Seq•Song page). Any
receiving unit which recognizes Song Position Pointers will locate to the same
spot. (Not all devices recognize Song Position Pointers. Consult the manual of
any other sequencing device you are using to see if it does.)
MIDI Song Selects
MIDI Song Selects allow a sequencer such as the EPS-16 PLUS to instruct a
remote sequencer or drum machine to select a new song whenever you select a
song on the EPS-16 PLUS. Whether or not it sends them depends on the setting
of the MIDI SONG SELECT parameter on the EDIT/System•MIDI page.
The SEQUENCER INFORMATION parameter on the COMMAND/Seq•Song
page allows you to set the MIDI SONG SELECT number that will be sent
whenever the song is selected. This information is saved when you save the
song.
10 - 1