Visit
www.ensalife.com
for support
7
1. Drill an 8mm hole in the pole
(minimum 15cm down from the top
of the pole) on the same side that
the camera will be mounted. This
is for the solar panel cable to run
through.
2. Feed the twin power cable
connected to your solar panel
through that hole
3. Place the solar panel bracket on top
of the pole, pointing north.
•
Note:
If you need to cover a different
area with the light beam, keep the
panel flat after repositioning .
4. Securely fasten the included grub
screws to the bracket. Tighten the
locking bolts to prevent the grub
screws from loosening.
(Fig. 2.1b)
•
Note:
For poles greater than 4m in
height, tapered poles are preferable
for camera stability and pole
strength.
8
mm
Fig. 2.1a
Solar panel power cable drill location
Fig. 2.1b
Installed grub screws
Caution:
Solar panel
must
be placed so it is in
direct sunlight all day
.
Any shading will greatly reduce the solar panel’s performance!
2. Installation
2.1 Mounting the Solar Panel to the Pole
