Enplus EVO UPS 10000VA, Руководство пользователя

Страница: 28 / 40

28
Conformance Safety CE
EMC (EMS / EMI) EN 62040-2, CISPR 22
EN 62040-2
EN 62040-2, CISPR 11
Equipment Protection
Policy
Warranty policy may vary depends on region
Power Dissipation
1433 BTU/h 2389 BTU/h
WARNING:
"When power supplied by external batteries, output toward loads must be
limited to less than 90% of overall power generation
For RM model at PF0.8
Tower model (with LCD display) 6000VA 10000VA
Capacity
Capacity (VA) 6000VA 10000VA
Capacity (W) 4800W 8000W
Output Voltage (on battery) 208V, 220V, 230V, 240V +/-2% (Selectable Output Voltage)
Frequency
(on battery)
50 / 60 Hz +/-0.5%
Transfer Time 0 ms
Overload Recovery Auto transfer to UPS
High Efficiency mode
(AC to AC)
> 95 % > 97 %
UPS Design Technology On-Line / Fully digitized microprocessor controlled
Output Wave Form Sine wave
Harmonic distortion < 3% of T.H.D. at linear load
Crest Factor 3 : 1
Protection
and
Filtering
Surge Protection IEC 61000-4-5 level 3
Overload Protection
106~120% for 30 seconds and
121~150% for 10 seconds
106~120% for 30 seconds and
121~150% for 10 seconds
Short Circuit Protection UPS output cut off immediately or input fuse / circuit breaker protection
System/
Display/
Warning Visual Display
(LED model) UPS on(green), line-mode(green), battery mode(yellow), bypass(yellow),
fault(red)
Visual Display
(LCD model) Input / output voltage, input / output frequency, on-line mode, back up mode,
battery capacity, load level
Audible Alarm (Battery
back-up)
Beep every 5 sec
UPS Fault Continuous beeping sound and LCD display
Communication RS-232 Serial Port and USB
Battery
Type Sealed, maintenance-free lead acid batteries
DC Voltage (V) Battery
(EBP) 240V / 12V7AH
x 20
240V / 12V9AH
x 20
Typical Recharge Time
to 90% Full
4 hours
Management Self-test, adjustable battery transfer points and alarm settings
Battery Protection Cut off without draining any current when battery is low
Cold Start (DC start) YES
Back Up Time
About 3~5min. Full load /
10~15 min. Half load
About 4~5min. Full load /
9~10 min. Half load
Physical Input Inlet Hardwire
Receptacles Hardwire
UPS Dimensions
W x D x H mm (inch)
W/O ISOTR
428 x 597 x 130
(16.9” x 23.5” x 5.1”)
428 x 658 x 130
(16.9” x 25.9” x 5.1”)
Net Weight
kg (lb) W/O ISOTR
20 (44.0) 24 (52.8)