BUILT-IN SYMBIOS SCSI BIOS
BIOS, Driver & Utility Guide
36
b) The media must be inserted before the system boot-up.
c) Only media with 512Bytes/sector is supported.
None
The removable media devices will not be used as BIOS devices.
Boot Drive
Only
Allows only the removable media installed as Drive C: to work as a
BIOS device.
With Media
Installed
Enables all removable disk drives to work as BIOS devices.
CHS Mapping
– Cylinder, Head, Sector mapping. Options are “SCSI Plug and Play
Mapping” (default) and “Alternate CHS Mapping”.
Spinup Delay
– 1-10 seconds. The default is a 2-second delay before the BIOS starts to
scan for SCSI devices during initialization. This amount of time is enough for most
devices to get ready for proper operation. Since some older hard drives may need more
time to spin up, you may need to extend the delay for those devices.
•
Device Selections
: Settings for the devices attached to the selected adapter are
viewed and changed.
SYM53C860
Devices 0 to 7
Sync Data
Disc Time
Scan
Queue
Init
Rate Width
Out
Bus
LUNS
Tags
Boot
Dev0 N/A
20
8
On
10
Yes
Yes
On
No
Dev1 N/A
20
8
On
10
Yes
Yes
On
No
Dev2 N/A
20
8
On
10
Yes
Yes
On
No
Dev3 N/A
20
8
On
10
Yes
Yes
On
No
Dev4 N/A
20
8
On
10
Yes
Yes
On
No
Dev5 N/A
20
8
On
10
Yes
Yes
On
No
Dev6 N/A
20
8
On
10
Yes
Yes
On
No
SYM53C860
20
8
On
10
Yes
Yes
On
No
Devices 8 to15
Help
Exit this menu
The above menu provides information about individual SCSI devices attached
to the selected host adapter, as well as the adapter itself. To make changes to
these settings select a device from this display and press <Enter> to bring up
the individual
Device Setup
menu.
Содержание EP-KE23
Страница 40: ...MAINBOARD BIOS SETUP BIOS Driver Utility Guide 9 ...
Страница 60: ...MAINBOARD BIOS SETUP BIOS Driver Utility Guide 29 ...
Страница 73: ...27 0M0686 45 ...
