ENPC EP-KE23, Руководство по установке

Страница: 41 / 73

MAINBOARD BIOS SETUP
BIOS, Driver & Utility Guide
10
EGA/VGA Enhanced Graphics Adapter/Video Graphics Array. For EGA,
VGA, SEGA, SVGA or PGA monitor adapters.
CGA 40 Color Graphics Adapter, power up in 40 column mode
CGA 80 Color Graphics Adapter, power up in 80 column mode
MONO Monochrome adapter, includes high resolution monochrome
adapters
Halt On - Determines whether or not the system will prompt you if an error is
detected during POST.
All Errors Whenever the BIOS detects a non-fatal error the system will be
stopped and you will be prompted.
No Errors The system boot will not be stopped for any error that may be
detected.
All, But Keyboard The system boot will not stop for a keyboard error; it will stop
for all other errors.
All, But Diskette The system boot will not stop for a disk error; it will stop for all
other errors.
All, But Disk/Key The system boot will not stop for a keyboard or disk error; it
will stop for all other errors.
Memory - This category is display-only. All memory detected by the POST (Power
On Self Test) of the BIOS is shown as the following types:
Base Memory is the amount of conventional memory installed in the system. This
value is typically 640K for systems with 640K or more memory installed on the
motherboard. The
Extended Memory is the amount of memory located above
1MB in the CPU's memory address map. Other Memory refers to the memory
located in the region between 640K and 1MB. This region can be used for
shadowing as well as expanded memory in DOS.