Enovation Controls Murphy PowerView PV485, Руководство по эксплуатации

Страница: 19 / 53

2021- 0306 - 2507 19 00-02-1207
Step Action
1 Select Display Settings, then Clock from the Main Menu.
2 The next screen highlights the hour. Adjust this using Buttons 2 and/or 4.
3 To move to the next field, press Button 5.
4 Adjust the minutes. Press Button 5.
5 Select between AM or PM. Press Button 5.
6 (Optional Step) Change between 12HR and 24HR using Buttons 2 or 4.
7 Press ing Button 3 will display popup messages will show ask to confirm or
cancel the new clock settings. set the time and clock settings.
8 Exit the Menu by pressing Button 1.
View Service Reminder
This selection exists to showsdisplays the remaining hours left until service is needed for the
Air filter, Battery life, Belt life, Fuel filter, Oil filter, Oil life and Overhaul. To cC hange or reset
the service hours via the Ss ystem Ss ettings menu.
Engine Settings
The Engine Settings menu houses the settings for the Engine:
•
Engine Manufacturer
•
Engine Model (optional depends on Engine Manufacture)
•
Engine Start Method
•
Show Ash Gauge
•
Show Soot Gauge
•
Show Regen Progress
•
Emission Settings