Enovation Controls Murphy PowerView PV485, Руководство по эксплуатации

Страница: 10 / 53

2021- 0306 - 2507 10 00-02-1207
Regen Screen
Press ing button 2 while R egen (a s shown in the image
above ) is displayed will open the R egen page ,
shown below. This provides the user control of engine
regeneration and current DPF status.
This same Regeneration page will automatically
popup when regeneration is required. A User can press Button 3 ( FORCE ) to
request regeneration or Button 2 ( INHIBIT ) to prevent/stop regeneration. Press
Button 4 ( AUTO ) to exit Inhibit mode.
To carry out a force
regeneration, each engine’s specific regen requirements must be met.
To carry out a force
regeneration, each engine’s specific regen requirements must be met.
I/O Status Screen
Press ing button 4 when I O Status is displayed will
open the I/O status page as shown below.
Disp lay connector pins with their corresponding functions
and current status will be shown . Use button 2 and 4 to scroll through
multiple pages of the IO Status . Once you have navigated to the last available
Commented [TM1]:
Would it be better to state it as "In
order to force a regeneration, each engine's specific regen
requirements must be met."
Commented [2R1]:
@Trina Moore
yes, that’s much
better.