Enovation Controls Murphy PowerView PV485, Руководство по эксплуатации

Страница: 32 / 53

2021- 0306 - 2507 32 00-02-1207
1 Select IO Settings, then Digital Inputs from the Main Menu. Press Button 5 to
select and enter.
2 Select Digital Input 1, 2, 3 or 4 Function (NC) and press Button 5 to enter. Use
Button 2 or 4 to scroll through the choices of Disabled, Strat/Stop, Throttle
Decrease, Throttle Increase, Stop Engine, Regen Request, Neutral Switch,
Park Brake, Park & Neutral, Engine Idle, Preset Speeds 1, 2, 3 or 4, or Crank
Abort. Press Button 3 to place a checkmark beside the desired option. Press
Button 1 to exit this level of the menu.
3 Select Digital Input 1, 2, 3 or 4 Action and press Button 5 to enter.
4 Use Button 2 or 4 to select either Low or High. Press Button 3 to confirm the
choice.
5 Press Button 1 to exit this level of the menu.
Analog Outputs
This menu option will set the Analog Outputs to either Disabled or Buzzer.
Step Action
1 Select IO Settings, then Analog Outputs from the Main Menu. Press Button 5 to
select and enter.
2 Use Button 2 or 4 to scroll through the choices of Disabled or Buzzer. Press
Button 3 to place a checkmark beside the desired option. Press Button 1 to exit
this level of the menu.
Digital Outputs
This menu option will set the parameters for Digital Outputs 1 through 4.
Functions Description
Disabled
PreStart Delay The delay time can be set when this function is selected. External
relay required
Formatted: Tab stops: Not at 14.84 cm
Formatted: Centered
Formatted Table
Formatted: Font: Bold
Formatted: Font: Bold