Enoch Systems SHB120, Руководство пользователя

Страница: 38 / 103

SHB120 LAG1156 Full-Size SBC U
ser’s Manual
Hardware Installation
31
3.2 Installing the Memory
The board supports two 240-pin DDR3 DIMM memory sockets with maximum memory capacity
up to 16GB.
Please follow steps below to install the memory modules:

Push down latches on each side of the DIMM socket.

Align the memory module with the socket that notches of memory module must match the
socket keys for a correct installation.

Install the memory module into the socket and push it firmly down until it is fully seated.
The socket latches are levered upwards and clipped on to the edges of the DIMM.

Install any remaining DIMM modules.