EnOcean EASYFIT EDRPB Скачать руководство пользователя

Страница: 22 / 68

USER MANUAL

ESRPB / EDRPB - EASYFIT BLUETOOTH® SINGLE / DOUBLE ROCKER PAD

F-710-017, V1.0

ESRPB / EDRPB User Manual | v1.3 | Jan 2018 | Page 22/68

5.1

NFC-based commissioning

All required ExRPB parameters can be read via a suitable NFC reader and writer supporting

the ISO/IEC 14443 Part 2 and 3 standards. The actual NFC implementation uses a Mifare
Ultralight tag.

Commissioning via NFC should follow these steps:

Unlock ExRPB by using the default NFC PIN code

0x0000E215

Read the Source Address, Security Key and Sequence Counter and configure the re-

ceiver accordingly

Important

: The pre-programmed random security key used by ExRPB can be ob-

tained both from the product DMC code as described in chapter 5.2, from received

commissioning telegrams as described in chapter 5.3 and via the NFC interface.

For security-critical applications where unauthorized users could have physical ac-

cess to the switch it is therefore strongly recommended to change the security key

to a new security key as part of the NFC-based commissioning process. To do so,

follow the procedure outlined in chapter 6.7.3.

For additional security, NFC read-out of the new security key can be disabled by set-

ting the

Private Security Key

flag in the

Configuration

new security key.

This ensures that even persons knowing the correct PIN code to configure this spe-

cific switch cannot read out the programmed new security key. Please verify that

you have properly documented the new security key as there is no possibility to re-

trieve this after it has been written.

Important

: It is strongly recommended to disable radio-based commissioning after

programming a new security key. This ensures that the new security key cannot be

read out by triggering a commissioning telegram as described in chapter 5.3.

To disable radio-based commissioning, set the

Disable Radio Commissioning

flag in

the

Configuration

0b1

, see chapter 6.7.6.

Important

: You should always change the NFC PIN code from its default setting to

a new NFC PIN code and lock the NFC configuration interface. This step is mandato-

ry to avoid access to the ExRPB configuration using the default PIN code.

Should you lose the new NFC PIN code then ExRPB can be reset to factory mode

(with the default NFC PIN code) by means of a factory reset as described in chapter

5.4. For security reasons, this factory reset will always reset the security key to its

pre-programmed value.

Содержание EASYFIT EDRPB





































































Результаты поиска

Содержание EASYFIT EDRPB

Отзывы:

Похожие инструкции для EASYFIT EDRPB

Бренды по названию

Популярные бренды

EnOcean EASYFIT EDRPB, Руководство пользователя

Результаты поиска

Содержание EASYFIT EDRPB

Отзывы:

Похожие инструкции для EASYFIT EDRPB

Бренды по названию

Популярные бренды