ennoLogic eT450C, Руководство пользователя

Страница: 14 / 36

ennoLogic Thermal Imaging Camera eT450C - User Manual
11
How to Use Your Thermal Imaging Camera
Operating Instructions
Powering the Camera On and Off
Press and hold the “ / MENU” button for more than 3
seconds to turn the Thermal Imaging Camera on or off. This
relatively long press time is designed to prevent accidental
powering on or off of the camera. This is particularly
important if the user has chosen to disable auto shutdown,
in which case an accidental powering on of the camera could
result in a drained battery.
Please note that there will be no indication on the screen
during the long-press of the power button. Hold the power
button for at least 3 seconds or until the boot image
appears on the screen. Conversely, when powering the
camera down, long-press the power button for at least 3
seconds or until the power off counter appears on the
screen.
LCD Display
After turning on the power you will see the boot screen and
progress bar for a few seconds. Then the camera will be live.
Note:
If the camera has been moved between extreme hot or cold
environments you may need to allow the camera to adjust