EN
25
performed.
Use of the power tool for
operations different from those intended
could result in a hazardous situation.
h)
Keep handles and grasping surfaces dry,
clean and free from oil and grease.
Slippery
handles and grasping surfaces do not allow
for safe handling and control of the tool in
unexpected situation.
Battery tool use and care
a)
Recharge only with charger specified
by the manufacturer.
A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
b)
Use power tools only with specifically
designed battery packs.
Use of any other
battery packs may create a risk of injury
and fire.
c)
When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
d)
Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help.
Liquid ejected from the
battery may cause irritation or burns.
e)
Do not use a battery pack or tool that
is damaged or modified.
Damaged
or modified batteries may exhibit
unpredictable behavior resulting in fire,
explosion or risk of injury.
f)
Do not expose a battery pack or tool to fire
or excessive temperature.
Exposure to fire
or temperature above 130°C may cause
explosion.
g)
Follow all charging instructions and do not
charge the battery pack or tool outside
the temperature range specified in the
instructions.
Charging improperly or at
temperatures outsides the specified range
may damage the battery and increase the
risk of fire.
Service
a)
Have your power tool serviced by a
qualified repair person using only identical
replacement parts.
This will ensure that
the safety of the power tool is maintained.
b)
Never service damaged battery pack.
Service of battery packs should only
be performed by the manufacturer or
authorized service providers.
Specific safety instructions for planer
●
Wait for the cutter to stop before setting
the tool down.
An exposed rotating cutter
may engage the surface leading to possible
loss of control and serious injury.
●
Use clamps or another practical way to
secure and support the workpiece to a
stable platform.
Holding the workpiece
by your hand or against the body leaves it
unstable and may lead to loss of control.
●
Do not insert your fingers into the chip
ejector.
You may injure yourself on rotating
parts!
●
Only hold the planer against the
workpieces when the planer is switched
on and running.
Otherwise there is risk of
kickback.
●
Do not use the planer for processing
metal.
The blade or cutting head could be
damaged.
●
The plane sole must lie flat on the
workpiece when working.
There is a risk of
injury due to plane jamming.
●
Hold onto the planer with two hands
during working and make sure you stand
firmly on the ground.
It is safer to handle
the planer with two hands.
●
Materials containing asbestos may not be
processed.
Asbestos is a known carcinogen.
●
Dusts can be produced while working that
are hazardous to health, inflammable or
explosive.
Wear a mask and use a suitable
dust / chip extractor.
●
Connect the planer to an appropriate
external dust extraction when working for
extended periods of time on wood and ,
in particular, materials that produce dust
which is hazardous to heath.
