ENKHO 148458.01, Руководство пользователя

Страница: 19 / 43

EN
15
EN
hOW tO INStALL thE APPLIANCE
Attention:
Switch off the appliance and remove the plug from the socket before inserting or removing the
individual parts.
•
Insert the handle (K) in the body of the motor (M) until you hear a “click” (Fig. 1). To discon-
nect the handle from the motor body press the release button (J) and pull the handle upwards.
•
Insert the brush (A) into the motor body. Press gently until it clicks (Fig 2).
INStRUCtIONS FOR USE
Attention:
Disconnect the power plug from the outlet when the appliance is not used.
•
Totally unwind the power cord.
•
Always hold the product and check that the ON/OFF switch is in the OFF position. Plug into the
mains socket.
•
Press the ON/OFF switch (I). Turn the control button (I) and set the suction power (Fig. 3).
•
Clean large surfaces pushing the brush back and forth: this allows the vacuum cleaner to collect
the fragments and dirt from the floor.
•
Press the brush switch (O) to position ( ) for cleaning hard surfaces such as floors (Fig. 4).
Press the brush switch (O) to position ( ) for the cleaning soft surfaces such as carpets (Fig.
5).
•
Press the ON/OFF switch (I) to turn off the appliance.
•
Store the power cord in the storage compartment (Fig. 6).
1 2 3
4 5 6