ENHANCED VISION Merlin LCD Plus, Руководство пользователя

Страница: 10 / 56

a. With a Computer
Note: Prior to installation, it is recommended
you set your computer to one of the resolutions
listed on the specification page 40.
1. Find a steady and level location, such as a
table or desk, where you will be comfortable
using Merlin Plus.
2. Carry Merlin Plus only by the two recessed
handles on the sides of the base for a secured
grip (see figure 1). Place it on the table or
desk. Place the VGA monitor on the Merlin
Plus platform.
3. Connect the built-in VGA cable from your
VGA monitor to the port labeled “MONITOR”
on the back of Merlin Plus (see figure 2).
Plug the VGA Monitor’s power cord into the
outlet.
4. Connect the female end of the VGA
extension cable provided (item 12 on page 7)
into the port labeled “COMPUTER” on the
back of your Merlin Plus. Connect the male
end of the VGA extension cable into the
15-pin VGA output port on your computer.
This is usually where you would connect
your VGA monitor to your computer (see
figure 3).
5. Connect the foot switch cable provided
(item 14 on page 7) into the jack labeled
“FOOT SWITCH” on the back of Merlin Plus.
6. Plug the power supply cord (item 11 on
page 7) into the outlet and the other end into
the DC IN 12V jack on the back of
Merlin Plus (see figure 4).
10
Setting Up Merlin Plus
figure 1
figure 2
figure 3
figure 4