Engler 121819 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 13

Engler 121819 Скачать руководство пользователя страница 13

13

PARTS AND ACCESSORIES INCLUDED WITH THIS SHIPMENT

1 - 110 Volt Circulator Unit
1 – Circulator tubing
1 - Plastic water release Key
1 - Remote Control

ENGLER WATER CIRCULATOR WARMING PUMP SPECIFICATIONS

Dimensions of Circulator:           11”(W) X 9”(D) X 7”(H)
Weight:             7.5 lbs.
Water Line Length:          5’
Voltage / Hz:           110 Volt / 50 ~ 60 Hz
Wattage @ start-up   (Heating):     200 Watts ± 10%
Wattage while running (Heating):     180 Watts ± 10%
Wattage @ start-up (Cooling):     180 Watts ± 10%
Wattage while running (Cooling):       80 Watts ± 10%
Noise:          <45db
Temperature Range:           Ambient to approx.118°F
Shipping Weight:             10 lbs.
Shipping Dimensions:          14”(W) X 11.5”(D) X 9”(H)

PLEASE READ VERY CAREFULLY

Engler Engineering Corporation (EEC) makes every effort to verify that all parts for this
device including any optional accessories ordered with it are included in this shipment.
It is imperative that you inspect the package and if you find any parts damaged or
missing, you must notify us immediately. Claims for damaged or missing parts will only
be accepted within five days of receipt.

EEC makes every effort to verify that our devices are built and tested to approved
standards. Any modification to the device, hoses or power supply initiated by others
nullifies all warranty statements. Engler Engineering Corporation will not be held liable
in any way, for any damage, injury or death due to non-authorized service, improper
installation, or improper use of this device. EEC's liability will not exceed the purchase
price of this machine.

The information contained herein is intended only as a guide. Individuals not properly
trained should not use this equipment. It is intended for professional use only

Engler Engineering Corporation

1099 East 47 Street Hialeah Florida 33013 USA

305-688-8581 / 800-445-8581

www.engler411.com / www.dynaxusa.com

«
...
11
12
13

Содержание 121819














Отзывы:

Нет отзывов