
12
TROUBLESHOOTING
PROBLEM
POSSIBLE REASON
SOLUTION
Does not start Not plugged in Plug circulator into an active receptacle.
Blown fuse Replace fuse
LEDs are on but unit
does not run. Lack of water Add distilled water.
Remote does not work. Batteries are dead Replace batteries in the remote.
Pair Remote to Circulator
Not warming properly / Water level low Add distilled water if low.
making noise Heat exchanger may be dirty. Remove fan
cover to clean, the intake or exhaust may
be blocked.
Pad size
(Large pad may not achieve max temp.)
Blows fuses frequently.
Water or some other foreign substance got into circulator unit.
Circulator unit emitting an unusual smell
If these conditions occur, unplug the circulator and call Engler Engineering Corp.
305-688-8581 or 800-445-8581