![England's Stove Works 30-NCG Скачать руководство пользователя страница 12](http://html.mh-extra.com/html/englands-stove-works/30-ncg/30-ncg_installation-and-operation-manual_2413077012.webp)
12
3. Side Heat Shields
This accessory item comes
with the hardware (six (6)
mounting screws) necessary to
install it on the rear of the
stove. This is a two-piece heat
shield, but is installed one
piece at a time. There are pre-
punched holes on each side of
the Rear Heat Shield; while
holding each piece of the Side
Heat Shield in place, align the
pre-punched holes in the Side
Heat Shield with the existing
holes in the Rear Heat Shield,
and fasten with the screws
provided.
See Illustration 1 for
clearances with and without
side heat shields.
Rear Heat
Shield
Side
Heat
Shield
Side
Heat
Shield
Illustration 3
– Side Heat Shield and Optional Blower Installation
Install AC-30 Optional
Blower on these (4) mounting
holes. See “Optional
Blower” Instructions.
BRICK LAYOUT
1 – (Unmarked on diagram) – 9” x 4” x 1.25” brick (Qty. 25)
3 – 4” x 2 ½ ” x 1.25” brick (Qty. 1)
2 – 4” x 2” x 1.25” brick (Qty. 1)
4 – Metal plate (Ash Drawer Plate, Qty. 1)
4
Steel
Riser
All Unmarked
Brick are Size “1”
3
Содержание 30-NCG
