A
base
IOM67
2
February 2021 R0
INTRODUCTION
Read this manual thoroughly before operating or
servicing this unit.
The Engineered Air
base
and CD-XM expansion
module have been certified by Intertek (ETL) as a
recognized component for use with Engineered Air
appliances only, evaluated to CSA 22.2 No. 24
Temperature Indicating and Regulating Equipment
and UL873 Standard for Safety Temperature
Indicating and Regulating Equipment. This is a User
Operation Manual and therefore not subject to
evaluation.
If any errors or omissions are noted please contact
the nearest Engineered Air Technical Service
Department.
To ensure warranty is honored, only qualified
personnel should be employed for service or
troubleshooting. If further information is required
please contact the nearest Engineered Air sales
office.
There are two sets of electrical drawings and
function sheets provided with the appliance. One
set is in an envelope which also contains the
Operation, Installation and Maintenance manual(s).
This package is for copying, then should either be
returned to the appliance or stored in a safe place.
The other set is attached to the control panel door
and should never be removed.
Copyright
This document and the information in it are the
property of Engineered Air, and may not be used or
reproduced in whole or in part without written
permission. Engineered Air reserves the right to
revise this publication at any time, and to make
changes to its content without obligation to notify
any person of such revision or change.
CONTACT INFORMATION
Canadian Head Office and Factory
1401 Hastings Cres. SE
Calgary, Alberta, Canada
T2G 4C8
PH: (403) 287 4774
FX: 1 888 364 2727
USA Head Office and Factory
32050 W. 83
rd
Street
De Soto, Kansas, USA
66018
PH: (913) 583 3181
FX: (913) 583 1406
Canadian Eastern Factory
1175 Twinney Drive
Newmarket, Ontario, Canada
L3Y 5V7
PH: (905) 898 1114
FX: (905) 898 7244
