Wireless 11g Broadband Router
Version 1.0
9
2.4 Connecting to the Router
Follow the steps below to connect the Router to your computer or network.
1. Make sure that your xDSL or cable modem is powered OFF.
2. Connect one end of the RF-45 cable to the WAN port of the Router, and the
other end to your xDSL or cable modem.
3. To build a wired Internet connection, plug one end of another RJ-45 into one of
the LAN ports, and the other end into your computer.
4. Power ON your xDSL or cable modem.
5. Plug-in the DC-end of the power adapter supplied into the DC-inlet of the Router,
and the other end to the power-socket.
6. Verify the status of the LEDs to make sure that the Router is connected properly.
2.5 TCP/IP Configuration
Follow the steps below in order to configure the TCP/IP settings of your PC.
A. In the Control Panel double click
Network Connections
, and then double
click on the connection of your Network Interface Card (NIC). You will then
see the following screen.
B. Select
Internet Protocol (TCP/IP)
and then click on the
Properties
button.
This will allow you to configure the IP address of your PC. You will then see
the following screen.
