Wireless 11g Broadband Router
Version 1.0
27
h
Enable AP Mode:
Place a check in this box to enable AP mode.
h
IP Address:
Enter the IP address of the AP.
h
Subnet Mask:
Enter the subnet mask of the AP.
h
Click on the
Apply
button to continue.
Please wait while the router resets. In AP mode the internal NAT firewall and DHCP
server will be disabled, and the four LAN ports and one WAN port will be bridged
together. You will then notice that the menu bar is different, and consists of System
and Wireless only.
4.2.12 Backup
Setting
This page allows you to save the current profile on your computer or load an existing
profile.
h
Save Settings:
Click on the Save button to save the current profile.
h
Restore Settings:
Click on the Choose File button to select the existing profile,
and then click on the
Restore
button. You will then need to confirm you
decision, click on the
OK
button. Please wait while the router resets.
