Base Features
Basic Base Station Features
1. Antenna
a. When selecting a location for the base station, it is better to
locate the base station as high as possible to avoid obstructions
that may interfere with radio transmission.
b. When using an outdoor antenna, locate the antenna (not the
base station itself) as high as possible for a clear transmission
path.
Note
:
The antenna port has a reverse thread connector; to remove
antenna or cable, turn clockwise; to install, turn
counterclockwise. Improper installation may damage the
connector.
2. Audio-in Jack (3.5 mm)
Provides MOH (Music on Hold).
3. Line Status LED's
LED lit indicates an active telephone line.
4. Power LED
LED lit indicates base station has power.
5. Line In
a. Supports 4 simultaneous telephone line connections.
b. Four standard RJ-11C/CA-11A connectors.
6. DC In
Connects to Base Station AC Adaptor.
7. Registration Key (REG)
Enters registration mode along with handset, assigns handset ID
(10-99).
8. Reset Button
a. Restores base station to factory settings:
(i) Base Station security code
(ii) Auto-Attendant (AA) Configuration:
On/Off, default = OFF
Number of rings before AA picks up, default = 2
16
