EnGenius ENH900EXT Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 76

background image

69

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate

this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:
Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 38 cm between the radiator & your body.

Appendix A

«
...
67
68
69
70
71
...
»

Содержание ENH900EXT













































































Отзывы:

Нет отзывов

Похожие инструкции для ENH900EXT

Бренд: D-Link Страницы: 12

Ethernet Broadband Router DIR-100

Бренд: D-Link Страницы: 70

Бренд: D-Link Страницы: 74

Бренд: D-Link Страницы: 76

myPocket DIR-457

Бренд: D-Link Страницы: 4

Бренд: Abocom Страницы: 2

Бренд: Super Circuits Страницы: 4

Бренд: Microsemi Страницы: 2

Бренд: BEC Страницы: 18

Бренд: Jade Страницы: 7

Бренд: Y!mobile Страницы: 2

Бренд: PRO-NETS Страницы: 72

Бренд: VKOM Страницы: 20

Бренд: Zonet Страницы: 51

IGAP-420 series

Бренд: ORiNG Страницы: 56

Бренд: ORiNG Страницы: 58

Бренд: Comtrend Corporation Страницы: 102

Бренд: Comtrend Corporation Страницы: 109

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды