Version 1.02
26
3.4 Wireless Client Router-to-Central Wireless
Router
Step 1
Set the COU to perform a Wireless Router (
Wireless Interface IP:
192.168.1.1, Ethernet Interface IP: 192.168.2.1, default route:
192.168.2.254
).
Step 2
Set Wireless parameters on COU:
Channel (1)
and
SSID
(wireless)
.
Step 3
Set the ROU to perform a Wireless Router (
Wireless Interface IP:
192.168.1.2, Ethernet Interface IP: 192.168.10.1, default route:
192.168.1.1
).
Step 4
Set Wireless parameters on ROU:
Channel (1) and SSID
(wireless)
, and these parameters must be the same with COU.
Step 5
Set the DHCP server service on the ROU and apply it on Ethernet
Interface.
Step 6
The ROU assigns IP addresses to PC1 and PC2.
Version 1.02
27
The operator can also disable NAT behavior on COU and enable NAT
behavior on ROU (
enable NAT on Wireless Interface
). In this case, any
outgoing packets will transfer to
192.168.1.2
.
The operator can also enable NAT behavior on COU (
enable NAT on
Ethernet interface
) and enable NAT behavior on ROU (
enable NAT on
Wireless Interface
).
