Version 1.02
24
3.2 Wireless Client Router-to-Central Wireless
Bridge
Step 1
Set the COU to perform a bridge (
bridge IP address:
192.168.2.1
).
Step 2
Set Wireless parameters on COU:
Channel (1)
and
SSID
(wireless)
.
Step 3
Set the ROU to perform a Router (
Wireless Interface IP:
192.168.2.2, Ethernet Interface IP: 192.168.10.1)
. It is a must to
enable NAT on Wireless Interface (
default route is
192.168.2.254
).
Step 4
Set Wireless parameters on ROU:
Channel (1)
and
SSID
(wireless)
, these parameters must same with COU.
Step 5
Set the DHCP server service on the ROU and apply it on Ethernet
Interface.
Step 6
The ROU assigns IP addresses to PC1 and PC2
Version 1.02
25
3.3 Wireless Client Bridge-to-Central Wireless
Router
Step 1
Set the COU to perform a Wireless Router (
Wireless Interface IP:
192.168.1.1, Ethernet Interface IP: 192.168.2.1
). It is a must to
enable NAT on Ethernet interface (
default route: 192.168.2.254
).
Step 2
Set Wireless parameters on COU:
Channel (1)
and
SSID
(wireless)
Step 3
Set the DHCP server service on the COU and apply it on Wireless
Interface.
Step 4
Set the ROU to perform a Bridge (
Bridge Interface IP:
192.168.1.2
).
Step 5
Set Wireless parameters on ROU:
Channel (1)
and
SSID
(wireless)
, and these parameters must be the same with the COU.
Step 6
The COU assigns IP addresses to PC1 and PC2.
Step 7
The operator can also disable NAT behavior on COU to make the
two subnets transparent.
