EnGenius Captive Portal “Ready”
Quick Installation Guide
Version 1.1 (for Cloud4Wi)
*** MUST READ ***
The package labelled “Captive Portal Ready” herein contains a Third-Party firmware &
management feature. It has distinctly different properties, configuration and capabilities
of that the stock product mentioned in the datasheet, CD user manual and box
packaging. This Quick Installation Guide supersedes any datasheet, CD user manual
and information on the box packaging to contain important instructions in setting up
your EnGenius Captive Portal Ready wireless networks. Please read and follow this
guide thoroughly to have an enjoyable experience in setting up your EnGenius Captive
Portal Ready Wireless Network.
Note: Guest authentication feature requires a separate paid subscription from third-
party cloud captive providers to work.
Check List:
•
Internet connection should be already setup & ready to use* (ADSL /Cable/Fiber modem router)
•
Modem/Router must provide RJ45 port to connect with EAP300-CP or ENS202EXT-CP. An Ethernet cable
is further required for the ENS202EXT-CP
•
Internet Browser (Recent version of Microsoft Internet Explorer or Firefox browser)
•
A pencil or pen ready to use “My Personal Notes” on the last page to assist you in remembering
any account names and passwords created
Important Notes:
•
(*) The internet connection should give you the ability to ping www.yahoo.com (resolve DNS) and to
normally browse a web page via http and https (SSL). If in doubt, use a laptop or computer with your
existing internet connection (which you will be connecting the equipment to) and type
http://www.yahoo.com on your browser. If there is no response, you need to resolve this with your internet
service provider before proceeding further this Quick Installation Guide
