ENFORCER 4-in-1 HD Cameras (TVI, CVI, AHD, Analog)
SECO-LARM U.S.A., Inc.
15
Special (continued):
-
MOTION: This function is used to detect
moving objects on-screen.
o
OFF: Turn motion detection off.
o
ON: Turn motion detection on.
SELECT: Select which of the four
motion detection zones to modify.
DISPLAY: Turn the selected motion
detection zone on or off.
OFF: The selected motion detection
zone is turned off.
ON: Adjust the position and size of the selected motion detection zone.
SENSITIVITY: Adjust the sensitivity of the selected motion detection zone. Adjust from
0~100 (Default: 64).
COLOR: Select the color of the selected motion detection zone. Select from Green,
Blue, White, and Red.
TRANS: Set the selected motion detection zone’s transparency. Adjust from 0.00~1.00
(Default: 1.00).
ALARM: Adjust settings for the motion detection notifications.
VIEW TYPE: Select between different view modes for motion detection.
o
OFF: Does not give any indication when motion is detected.
o
BLOCK: Shows small blocks over the motion in the detection zone that is
triggered.
o
OUTLINE: Shows an outline around the motion in the detection zone that is
triggered.
o
ALL: Shows blocks and an outline of all motion detection zones when motion is
detected.
OSD VIEW: When turned on, MOTION DETECTED will display when any of the
motion detection zones are triggered.
ALARM OUT: Not used.
TIME: Set the amount of time that the motion detection alerts remain on the screen.
Adjust from 0~15 seconds (Default: 3).
RETURN: Return to the MOTION menu screen.
DEFAULT: Return the MOTION settings to their default values.
RETURN: Return to the MAIN MENU screen.
Motion Detection OFF
Motion Detection ON
