ENFORCER 4-in-1 HD Cameras (TVI, CVI, AHD, Analog)
SECO-LARM U.S.A., Inc.
13
Day & Night (continued):
Noise Reduction (NR):
-
COLOR: Select COLOR to force the camera to display in color mode at all times.
-
B/W: Select B/W to force the camera to display in B/W mode at all times.
o
BURST: Enable or disable the color burst when the camera switches from Color to B/W.
o
IR SMART: The Smart IR feature adjusts the electronic shutter to adjust the IR exposure.
OFF: Turn the Smart IR function off.
ON: Turn the Smart IR function on.
LEVEL: Adjust the level of the Smart IR. Adjust from 0~15 (Default: 1).
AREA: Adjust the position and size of the Smart IR area.
RETURN: Return to the B/W menu screen.
o
IR PWM: Not used.
o
RETURN: Return to the EXPOSURE menu screen.
NOTE: If DAY & NIGHT is set to B/W then WHITE BAL is not available.
DNR OFF
DNR ON
This function is used to reduce the noise on the screen and allows for clearer images in low light
conditions.
1.
Select NR on the Main Menu screen.
2.
Press enter to enter the Noise Reduction
menu screen.
3.
Select the desired Noise Reduction operation
by moving the joystick up or down, and select
the desired setting by moving the joystick left
or right.
4.
Select RETURN to return to the Main Menu
screen.
-
2DNR: Select the 2D Digital Noise Reduction (2DNR) for general lighting conditions. Higher
levels of DNR will decrease the noise in the image but also potentially affect the sharpness.
Adjust from OFF~HIGH (Default: MIDDLE).
-
3DNR: Select the 3D Digital Noise Reduction (3DNR) for low lighting conditions. Higher levels
of DNR will decrease the noise in the image but also potentially increase after images. Adjust
from OFF~HIGH (Default: MIDDLE).
-
RETURN: Return to the MAIN MENU screen.
