ENFORCER Dashboard Camera
10
SECO-LARM U.S.A., Inc.
Photo Settings Menu continued
Capture Mode:
This function sets the delay before a photo is taken after the record button is pressed.
1.
Select Capture Mode on the photo menu screen.
2.
Select the desired setting. If “Single” is selected, a photo will be taken immediately.
(Single, 2S Timer, 5S Timer, 10S Timer)
3.
After the selection is made, you will automatically return to the photo menu screen.
White Balance:
This function is used to adjust the color temperature and image color of the picture.
1.
Select White Balance on the photo menu screen.
2.
Select the desired setting based on the environment’s lighting.
(Auto, Daylight, Cloudy, Tungsten, Fluorescent)
3.
After the selection is made, you will automatically return to the photo menu screen.
ISO:
This function is used to adjust the ISO (International Standards Organization) Setting. This setting
affects the camera’s sensitivity to light.
1.
Select ISO on the photo menu screen.
2.
Select the desired setting based on the environment’s lighting. (Auto, 100, 200, 400)
3.
After the selection is made, you will automatically return to the photo menu screen.
Exposure:
This function is used to manually adjust the shutter speed.
1.
Select Exposure on the photo menu screen.
2.
Select the desired exposure setting. (+3, +2, +1, +0, -1, -2, -3)
3.
After the selection is made, you will automatically return to the photo menu screen.
Date Stamp:
This function is used to set whether or not the date stamp will appear in the bottom right corner of
the screen.
1.
Select Date Stamp on the photo menu screen.
2.
Select the desired setting. (Off, Date, Date/Time)
3.
After the selection is made, you will automatically return to the photo menu screen.
Quality:
This function is used to set the photo quality. The lower the quality, the less room a photo will
occupy on the micro SD card.
1.
Select Quality on the photo menu screen.
2.
Select the desired setting. (Fine, Normal, Economy)
3.
After the selection is made, you will automatically return to the photo menu screen.
Sharpness:
This function is used to set the sharpness of the photo.
1.
Select Sharpness on the photo menu screen.
2.
Select the desired setting. (Strong, Normal, Soft)
3.
After the selection is made, you will automatically return to the photo menu screen.
