
Destination 2.3 Insert Installation and Operation Manual
13
The smoke released from wood when it is heated contains about half of the energy content of the
fuel. By burning the wood completely, your insert releases all the heat energy from the wood instead
of wasting it as smoke up the chimney.
Also, the features inside the firebox allow you to reduce the air supply to control heat output, while
maintaining clean and efficient flaming combustion, which boosts the efficient delivery of heat to your
home.
The emission control and advanced combustion features of your insert can only work properly if your
fuel is in the correct moisture content range of 15 to 20 percent. See
Section 3
of this manual for
suggestions on preparing fuelwood and judging its moisture.
2.7 The SBI Commitment to You and the Environment
The SBI team is committed to protecting the environment, so we do everything we can to use only
materials in our products that will have no lasting negative impact on the environment.
2.7.1 What is Your New Insert Made Of?
The
body
of your insert, which is most of its weight, is carbon steel. Should it ever become necessary
many years in the future, almost the entire insert can be recycled into new products, thus eliminating
the need to mine new materials.
The
paint
coating on your insert is very thin. Its VOC content (Volatile Organic Compounds) is very
low. VOCs can be responsible for smog, so all the paint used during the manufacturing process
meets the latest air quality requirements regarding VOC reduction or elimination.
The
air tubes
are stainless steel, which can also be recycled.
The C-Cast
baffle
is made of an aluminosilicate fibre material that is compressed with a binder to
form a rigid board. C-Cast can withstand temperatures above 2,000 °F. It is not considered
hazardous waste. Disposal at a landfill is recommended.
Firebrick
is mainly composed of silicon dioxide, also known as silica, a product processed from a
mined mineral. It is most commonly found in nature in the form of sand and clay. Disposal at a landfill
is recommended.
The door and glass
gaskets
are fibreglass which is spun from melted sand. Black gaskets have
been dipped into a solvent-free solution. Disposal at a landfill is recommended.
The door
glass
is a 4 mm thick ceramic material that contains no toxic chemicals. It is made of
natural raw materials such as sand and quartz that are combined in such a way to form a high
temperature glass. Ceramic glass cannot be recycled in the same way as normal glass, so it should
not b
e disposed of with your regular household products. Disposal at a landfill is recommended.
3 Fuel
MATERIALS THAT SHOULD NOT BE BURNED:
−
COAL;
−
GARBAGE;
−
LAWN CLIPPINGS OR YARD WASTE;
−
MATERIALS CONTAINING RUBBER, INCLUDING TIRES;
−
MATERIALS CONTAINING PLASTIC;
Содержание Destination 2.3
