ENERVEX MEC 18, Инструкция по установке и эксплуатации

Страница: 6 / 18

6
3916010 06.16
3. MECHANICAL INSTALLATION
3.1 LOCATION
The control and transducer must be installed indoors. The
control does not need to be installed in an enclosure. See
Fig. 2 for component connections.
Fig. 2
Fig. 2a
Fig. 3
The transducer cannot be mounted inside an
airtight enclosure. It uses the atmoshpheric
pressure as reference pressure.
XTP Sensor
Max. 300 feet
3.2 MOUNTING OF CONTROL
The control can be mounted directly to a wall or similar.
Remove the cover. The mounting holes are located under the
plastic screws that hold the cover in place. See Fig. 3.
The distance between the control and the transducer should
not exceed three hundred (300) feet.
MEC 18
E X H A U S T C O N T R O L